

A Complete Ring Cutting Solution!
Safe, Easy To Use & Efficient
The Ring Rescue Kit provides professionals with the only comprehensive medical device solution for removing stuck rings.
Let’s break it down:
The Dolphin Ring Cutter
• Easily cuts through any ring metal
• Virtually eliminates the risk of injury for the patient and provider
• Saves valuable time and resources
The Compression Device reduces finger swelling allowing professionals to remove rings intact, or; Creates space to insert the Dolphin™ guard under the ring, enhancing patient comfort and satisfaction.
Safe, Simple, Fast, one person stuck Ring Removal

Ring Removal Kit



Simple and Safe


One Person Operation


Specialty Lubricant



Ring Rescue
When Shrinking the Finger doesn’t work
The Ring Rescue compression device is a ring removal tool that shrinks finger size to help you remove stuck rings non-destructively.
If that doesn’t work then it’s time to cut the ring off.
The Dolphin Ring Cutter is safe, fast and effective.









Ring Rescue Dolphin Ring Cutter
FEATURES & BENEFITS
Cuts any metal
Have confidence you can cut any ring material you come up against Reduced risk
Reduced risk of burns compared to current ring cutting methods
The device uses a slow spinning blade to minimize heat generation (when used following manufacturer’s instructions)
Fast & effective cut
The automatic guard uses a feedback loop to adapt to any ring, while controlling heat generation
Over Power Alert
If the device detects a cutting force that is too high signally improper use, it will alert the user, or if required, turn the
Dual Powered
60 minutes of cutting time battery life with backup corded operation so you never have to worry about being without a solution
Single Person Operation
No need for multiple people to assist in ring cutting. We have added automation to make ring cutting a seamless process




Ring Rescue Dolphin Ring Cutter
FEATURES & BENEFITS


Ring Rescue Dolphin Ring Cutter
FEATURES & BENEFITS






WHY Ring Rescue Unique Features
1. The Dolphin™ Ring Cutter is the only electric ring cutter registered with the FDA.
2. The Dolphin™ Ring Cutter operates with intelligent cutting at a disc spin rate speed that is designed and validated specifically for ring cutting in stuck ring removal procedures. This is internally regulated through the pressure applied by the automated guard, to the ring and onto the cutting disc. Additionally, this is the safe speed to reduce heat generation (reduce burn risk), and also eliminate sparks and high speed ejected particles which are a risk to anyone nearby.
3. The Dolphin™ has an automatic shut-off feature. In cases where excess force or improper use is sensed, the Ring Cutter may pause for 5 seconds.
4. The Dolphin™ has a progress indicator that shows the percentage of the cut that has been completed.
5. The Dolphin™ has a lubrication indicator to remind the user to apply Ring Rescue Ring Lubricant to the spinning disc to optimize for speed and safety.
6. The Dolphin™ has an integrated work light to make use easy in virtually any lighting environment.
7. Cutting discs are quickly and easily changed by hand without the need for any additional tools.
8. The Dolphin™ Ring Cutter uses a single proprietary grinding disc capable of efficiently cutting any ring metal.
9. The Dolphin™ is powered by an integrated, rechargeable medical-grade lithium-ion battery.
10. In addition to the rechargeable battery, the Dolphin™ Ring Cutter can be operated while plugged into a power source in case of a depleted battery.
11. The Dolphin™ has a battery life indicator to monitor charge level.
12. A fully charged battery will allow for over an hour of continuous cutting.
13. A fully charged battery will hold its charge for over 6 months while not in use.
14. The Ring Rescue Compression Device is also included in the Ring Rescue Kit. It replaces and is more effective than current non-destructive techniques such as the string wrap.
FAQ Dolphin Ring Cutter
Why the Dolphin Ring Cutter versus other Electric Ring Cutters?
- The Dolphin(TM) Ring Cutter is the only electric ring cutter registered with the FDA and Health Canada. These agencies regulate the sale of medical device products in North America and monitor the safety of all regulated medical products. Currently, all other electric ring cutters are being used off-label, and this increases liability for the patient and the provider.
- The Dolphin(TM) is easy to use and only requires a single person to operate
- The Dolphin(TM) Ring Cutter can cut all ring metals, even the most difficult-to-cut metals such as Tungsten and Titanium, using a specially designed AssureCUTTM disc.
- The automatic guard applies optimal force for the fastest cut possible within a safe temperature range which helps to significantly reduce the risk of burns compared to other cutting methods.
What diameter will the Dolphin(TM) Ring Cutter cut?
The Dolphin(TM) can cut 6 mm thick and 10 mm wide which covers typical ring sizes. If you have a ring that is over 10 mm wide you can perform two cuts of 10 mm on each side to remove the ring with the limitation being +20 mm width.
How many cuts can be made with the AssureCUTTM discs?
Our AssureCUT discs are ment to be single-use – one disc per ring removal. Most difficult metals such as Tungsten, Titanium, Cobalt, etc, can not be pried apart and require two cuts to be removed. Used discs will contain ring debris and lubricant residue. Reusing discs will void the Ring Cutter warranty and also negatively impact cutting performance.
Is the battery rechargeable?
Yes, the DolphinTM is powered by an integrated, rechargeable medical-grade lithium-ion battery with the option for plug-in use so you will never be without it.
How long does the battery last?
- A fully charged battery will allow for over an hour of continuous cutting. In the event of a depleted battery, the Dolphin(TM) Ring Cutter can be operated while plugged into a power source.
- A fully charged battery will hold its charge for over 6 months while not in use. However, the battery will gradually discharge during storage, and prolonged storage times will require recharging prior to battery-only use. We recommend periodically checking the Dolphin(TM) charge level and fully charging the device when necessary.
How long does the battery take to charge?
A full charge is approximately 2 hours. We recommend that the device be recharged fully before storing it. During charging all three lights will flash, and when fully charged this flashing will cea
What do the charge levels indicate?
- 3 bars indicate = 70-100% charge remaining
- 2 bars indicate = 30-70% charge remaining
- 1 bar indicates = 1-30% charge remaining
How often do I need to apply lubricant and how much lubricant should be applied?
The lubricant light is on a 30-second timer. When the blue light flashes, apply 2 well-targeted sprays of the lubricant to the cutting disc. Cutting can be continued while the blue light flashes and while applying lubricant. If cutting is stopped while applying lubrication, the blue light will continue to flash when cutting is resumed until it has completed 5 flashes. These flashes can be ignored as only 2 well-targeted sprays of lubricant are required every 30 seconds.
Can an alternate lubricant be used?
No, Ring Rescue lubricant is specially formulated for use with this device. It works to reduce heat generation and provide efficient cutting. The use of an alternate lubricant will void the Ring Cutter warranty.
Why does the guard move slowly?
The guard moves slowly to allow the operator to position it precisely.
How do I know that the guard is touching the ring and ready to cut?
Advance the guard until you observe it touching the ring. The guard automatically stops when it makes contact with the ring and will not damage the AssureCUTTM disc or ring. When the disc has made contact with the ring, cutting can begin.
How do I know that the guard is touching the ring and ready to cut?
Advance the guard until you observe it touching the ring. The guard automatically stops when it makes contact with the ring and will not damage the AssureCUTTM disc or ring. When the disc has made contact with the ring, cutting can begin.
The cut appears/sounds like it is complete but the progress indicator isn't fully illuminated and flashing green.
Near the end of the cut the cutting sound often changes, this does not necessarily mean the cut is complete, and continuing to cut until the progress indicator reads 100% is the most reliable way to ensure cutting is complete.
What is the warranty and service process?
- Ring Rescue products come with a 1-year warranty.
- The manufacturing facility located in Dartmouth Nova Scotia performs both warranty and service repairs are completed here.


Step 1 Compression Device
Ring Rescue compression device offers a new and effective solution for stuck ring removal. By using our device to reduce finger swelling, the chance of removing the ring without a ring cutter increases significantly.
Why destroy a valuable keepsake if you don’t have to? With our Ring Rescue compression device, you significantly increase your chance of preserving sentimental property.



Step 2 Dolphin Ring Cutter
See What Others Have To Say
About The Ring Rescue.
Ring Rescue
On CBC Dragons Den
(the Canadian version or Shark Tank)
Dr. Mark Plaster of EP Monthly has ring that has been stuck for over 40-years removed with the help of Ring Rescue Compression Device.
Dr. Mark Plaster
Live ring removal at FDIC 2021. Rich, from Chicago Fire Department, had his ring stuck for over 3 years
Rich W.
Chicago FD
“We had a difficult ring removal in the ER of Campbell River, BC. The patient’s nurse already knew how to use Ring Rescue and took the initiative to give it a try after some other methods she tried had failed. Ring Rescue proved itself useful in safely getting the ring off. I recommend having this tool available in your ER!”
LIVE Ring Removal at the 2019 ACEP Conference. “Simple and it Works!”
Follow Us